BOS 4025 COMPLETE UNIT ASSIGNMENTS LATEST-CSU
Visit Below Link, To Download This Course:
BOS 4025 Complete Unit Assignments Latest-CSU
BOS4025
BOS 4025 Unit 2 Scholarly Activity Latest-CSU
Unit II Scholarly Activity
For this assignment, choose either Option A or Option B below.
Option A
Conduct an inspection of a workplace for compliance with the
means of egress requirements in 29 CFR 1910.36 and 1910.37, and prepare a
report of your findings. You can use your current workplace or a local business
or industry if you can get permission. Your report should contain the following
items:
a brief description of the workplace inspected;
a compliance checklist prepared for the specific workplace and
the standards being evaluated; noncompliance observed, including the full OSHA
standard citations;
recommended corrective actions; and a summary of overall
compliance.
The report should be a minimum of two pages in length (double-spaced),
including the checklist. The report must follow APA guidelines for formatting,
and the report must include a title page and reference page.
Option B
Many workplaces use portable ladders to conduct work (e.g.,
painting, repairing) or to access supplies and materials. Locate any ladders
used in your workplace, and conduct an inspection of them for compliance with
29 CFR 1910.23 and 1910.26. If you are able to observe any ladders in use,
evaluate whether they are being used in accordance with the standards.
Your report should contain the following items:
a brief description of the workplace inspected;
a compliance checklist prepared for the specific workplace and
the standards being evaluated; noncompliance observed, including the full OSHA
standard citations;
recommended corrective actions; and a summary of overall
compliance.
BOS 4025, OSHA Standards 2
The report should be a minimum of two pages in length
(double-spaced), including the checklist. The report must follow APA guidelines
for formatting, and the report must include a title page and reference page.
Information about accessing the grading rubric for this
assignment is provided below.
BOS 4025 Unit 3 Case Study Latest-CSU
Unit III Case Study
OSHA’s personal protective equipment (PPE) standard requires
employers to assess the workplace to determine if hazards are present, which
may necessitate the use of PPE. Based on the assessment, appropriate PPE must
be selected and provided to affected employees.
Using Subpart I Appendix B as a guide, develop a hazard
assessment for your workplace or a workplace with which you are familiar. If
you work in an office, or if you work in another non-hazardous location,
develop an assessment for an imagined industrial shop such as woodworking or metalworking.
Use the other sections of Subpart I to help determine the appropriate PPE for
each hazard. You can also use online safety equipment catalogs to find examples
of PPE that meet the OSHA requirements.
Your submission must be a minimum of two pages in length
(double-spaced). Begin your case study with an engaging opening statement that
connects the reader to the case study. References and citations in APA format
should be provided to support the hazard determinations and PPE selection. The
reference page does not count toward meeting the two-page minimum.
Click here to locate the Subpart I Appendix B.
Information about accessing the grading rubric for this
assignment is provided below.
Unit IV Case Study
Consider the scenario below:
Workers need to enter a below-ground, concrete-lined vault to
repair a leaking valve that controls the flow of wastewater from several
buildings at your plant. The opening for the pit is outdoors and secured with a
36-inch diameter manhole cover. The pit is 12 feet deep, and the walls are 6
feet x 6 feet wide. The valve is at the bottom of the vault. You opened the
cover, tested the atmosphere, and found oxygen levels to be at 16%. No toxic
substances were detected. After ventilating the space for 15 minutes, the
oxygen reading reached 18% and remained at that level.
Address the following items:
Using the flow chart in Appendix A of 29 CFR 1910.146, determine
the classification of the space. Explain how you reached the decision.
Based on your determination, develop an OSHA-compliant standard
operating procedure (SOP) for workers to follow when entering the space to
repair the valve. Include the citation(s) from 29 CFR 1910.146 for each step of
the procedure.
Your submission must be a minimum of two pages in length
(double-spaced). Be sure to include a title page.
Information about accessing the grading rubric for this
assignment is provided below.
BOS 4025 Unit 5 Assessment Latest-CSU
Unit V Assessment
1. Your company is planning to
build a new storage and distribution warehouse for furniture products.
Forklifts will be required to move material around the warehouse and to load
and unload trailers. The purchasing department asked you if they should buy
internal combustion engines or electric-powered forklifts. Based on the OSHA
standard, discuss the considerations that need to be part of the decision, and
provide your recommendation on the type of forklift that should be purchased.
Two hundred word minimum. Originality will be checked.
2. OSHA’s powered industrial truck
standard (1910.178) is consistently part of OSHA’s annual list of top 10
standards violated. Discuss some reasons why this is the case. Provide examples
that illustrate your point.
Two hundred word minimum. Originality will be checked.
3. In what ways does establishing a
safety and health management system in an organization complement and improve
compliance with the OSHA standards? Provide examples in your discussion.
Two hundred word minimum. Originality will be checked.
BOS 4025 Unit 6 Case Study Latest-CSU
Unit VI Case Study
The standards in Subpart S are consistently in the top 10 in
OSHA’s most frequently cited standards lists and highest penalties assessed
lists. The standards in Subpart S are complex and often misunderstood—even by
professional electricians.
Use the checklist here to conduct an electrical safety
inspection of your workplace. Add the citation for the OSHA standard for each
question. In the comments section for each item, include your recommendations
for correcting the violations. If a checklist item does not apply to your
organization, explain why in the comments. In the summary section at the end of
the checklist, discuss the significance of any noncompliance you found, and
identify the types of injuries that might result if the violations are left
uncorrected.
If you did not find any noncompliance, discuss what your
organization does to prevent electrical safety violations and electrical
injuries. Compile the checklist information into a report that outlines the
major issues, if any, found in your workplace.
The case study should be a minimum of two pages in length
(double-spaced), including the completed checklist. The report must follow APA
guidelines for formatting, and the report must include a title page and
reference page.
Information about accessing the grading rubric for this
assignment is provided below.
BOS 4025 Unit 7 PowerPoint Presentation Latest-CSU
Unit VII PowerPoint Presentation
The 2012 revision to the Hazard Communication Standard (HCS)
requires that employers train workers on the GHS-compliant hazard warning
labels and safety data sheets (see 1910.1200(h)(3)(iv)).
Using Appendices C and D of the current standard as a resource,
develop a 10-slide PowerPoint presentation that can be used to train the
employees at your workplace or a workplace with which you are familiar. Include
examples of the hazardous materials found in your selected workplace in the
presentation.
When creating your presentation, be sure your explanations and
discussion are in plain language and at a level suitable for BOS 4025, OSHA
Standards 3 your target workforce; do not just quote the standard. Additional
resources can be found at OSHA’s Hazard Communication page located below.
Please incorporate at least two references into the PowerPoint
presentation. The notes may be used to explain the concepts listed on each
slide in the PowerPoint presentation.
Occupational Safety & Health Administration. (n.d.). Hazard
communication. Retrieved from https://www.osha.gov/dsg/hazcom/index.html
Information about accessing the grading rubric for this
assignment is provided below.
BOS 4025 Unit 8 Case Study Latest-CSU
Unit VIII Case Study
There are two parts to this assignment. You must complete both
parts. Each part must be a minimum of one page in length, for a total of two
pages, not counting the title and reference pages. Please incorporate at least
two references into the case study assignment. The assignment should be
uploaded as one document, following APA formatting and referencing standards.
Part I: The General Duty Clause
Using the requirements for General Duty Clause violations in
Chapter 4 of the OSHA Field Operations Manual (FOM) and any additional
information you can find in OSHA compliance directives or standards interpretations,
describe a situation involving ergonomics that could be cited as a violation of
the General Duty Clause (Section 5(a)(1) of the OSH Act).
Explain how your citation meets the four elements listed in the
FOM as necessary to prove such a violation.
Part II: Interpreting OSHA Standards
Search the OSHA standards interpretations and compliance
directives for supplemental information on three standards that are important
to your workplace or a workplace with which you are familiar. Discuss what you
found for each of the standards. Does the information change the way you view
these standards or what you might need to do to comply with them in your
workplace?
Comments
Post a Comment